# Installation

### Can these cabinets be wall mounted only?

No.  
To ensure **long-term durability and safety**, our cabinets are designed to be supported by **steel legs** and mounted to the wall.  

*   The **legs provide primary structural support**
*   Wall mounting adds **stability and safety**

For additional clearance, we offer **6”–8” adjustable legs**, which make cleaning easier while maintaining proper support.  
Our **lifetime warranty requires the legs to remain in place**.  

* * *

### What tools do I need?

Installation typically requires standard household tools, including:  

*   Drill
*   Power screwdriver
*   Level
*   Measuring tape
*   Stud finder (recommended)
*   Appropriate wall fasteners

Most homeowners already have the tools needed.  

* * *

### What if my floor is uneven?

No problem.  
Our cabinets are designed to handle uneven floors using:  

*   **Adjustable legs** for leveling
*   Installation adjustments to align cabinets

You can still achieve a **straight, level, professional-looking installation**.  

* * *

### What if my walls aren’t straight?

That’s common in garages.  
During installation:  

*   Cabinets can be adjusted and aligned
*   Minor wall irregularities can be accommodated

You can still achieve a clean, consistent layout.  

* * *

### Do you provide installation instructions?

Yes.  
We provide:  

*   Detailed written instructions
*   Step-by-step installation videos

You can view them here:  
[https://www.garagecabinets.com/installation/](https://www.garagecabinets.com/installation/)  

* * *

### Can I install these cabinets myself?

Yes.  
Most customers install the cabinets themselves.  

*   Designed for **DIY installation**
*   Uses standard tools
*   No specialized equipment required

However, this is a **full cabinet system**, not a lightweight shelving unit—so it does require time, care, and attention to detail.  

* * *

### How difficult is installation?

Installation is manageable for most homeowners, but it does require:  

*   Careful leveling
*   Proper alignment
*   Securing cabinets together and to the wall

It’s closer to installing a full kitchen cabinet system than basic shelving.  
When done correctly, you get a **clean, professional, long-lasting result**.  

* * *

### Do I need to mount the cabinets to the wall?

Yes.  
Wall mounting is required for:  

*   Safety
*   Stability
*   Proper system performance

Even though cabinets sit on legs, wall mounting prevents:  

*   Tipping
*   Movement
*   Misalignment over time

* * *

### How long does installation take?

Installation time depends on:  

*   Size of the system
*   Complexity of the layout

A designer can help estimate installation time based on your specific project.  

* * *

### Can I hire someone to install them?

Yes.  
You can hire:  

*   A contractor
*   A handyman
*   A professional installer

No special or proprietary installation process is required.  

* * *

### What if I make a mistake during installation?

We’re here to help.  
If you run into issues:  

*   Contact our team
*   We’ll guide you through solutions

You’re not on your own during installation.  

* * *

### Should cabinets be attached to each other?

Yes.  
We recommend fastening cabinets together to:  

*   Prevent movement
*   Eliminate gaps
*   Create a clean, built-in look

We provide screws for this purpose.  
  
![](https://res.cloudinary.com/dstack/image/upload/v1775489544/vFb3UrHUpg_screwing_cabinets_together_puad7z.jpg)

* * *

### How do I attach cabinets to each other?

Use the provided screws and attach cabinets at the front:  

*   One screw at the **top front corner**
*   One screw at the **bottom front corner**

This keeps cabinets aligned and secure.  

* * *

### What size hole is needed for euro screws?

Use a:  

*   **3/16” drill bit**

* * *

### What type of screws should be used to mount cabinets to the wall?

This depends on your wall type:  
**For concrete walls:**  

*   Use **Tapcon concrete screws**
*   Must penetrate at least **1” into the concrete**

**For wood studs with drywall:**  

*   Use **washer head or cabinet screws**
*   Must penetrate at least **1” into the stud** (not including drywall thickness)

Common brands:  

*   GRK
*   Spax
*   Hillman

Note: Some garage walls (especially shared walls with the house) may have **multiple layers of drywall**, so choose screw length accordingly.  

* * *

### Where can I find assembly instructions?

We provide full installation resources here:  
[https://www.garagecabinets.com/installation/](https://www.garagecabinets.com/installation/)  
This includes:  

*   Assembly videos
*   Installation guides
*   PDF instructions

* * *

## Summary

Our installation system is designed to be:  

*   **DIY-friendly** with standard tools
*   **Flexible** for real-world conditions (uneven floors, imperfect walls)
*   **Strong and secure** with proper mounting and support

With the right setup, you’ll end up with a cabinet system that looks professional and performs for years.  

* * *